TTL-232R-5V-WE, USB TTL usb to serial cable with wires open end, ftdi chipset cable
1.TTL-232R Converter Cable provides a USB to TTL Serial interface with various end connectors.
2. Onboard FT232RL provides single chip USB to asynchronous serial data transfer interface.
3. Entire USB protocol handled by the electronics in the cable USB.
4. Connect directly to a microcontroller UART or I/O pins.
5. 5V CMOS drive outputs and 5V safe TTL inputs make the TTL-232R easy to interface to 5V MCU”s.
6. +5V or +3.3V output allows external logic to be powered from the USB port.
7.6-way outputs provide Tx, Rx, RTS#, CTS#, VCC, and GND (except Audio Jack which provides only TX, RX, and GND).
8.3-way Audio Jack connector provides Tx, Rx, and GND.
9.Low USB bandwidth consumption.
10.UHCI / OHCI / EHCI host controller compatible.
11.USB 2.0 Full Speed compatible.
12.-40°C to +85°C operating temperature range.
13. Cable length is 1.80m (6 feet).
14. Custom versions also available (subject to MOQ).
| Type | USB to Serial TTL Cable (OEM FTDI Cable) |
| Connector 1 | USB A Male |
| Connector 2 | 6Pin connector,6 open wires,DC3.5MM Plug optional |
| Chipset Used | FT232RL |
| Cable | 3 core, 4 core, 6 core available |
| Pinout | VCC, TXD, RTS, RXD, CTS, GND |
| Support | WINDOWS7/8/98/ME/2000/XP,Vista32,Mac8.6 or later,LINUX O.S,etc |
TTL-232R-5V-WE and TTL-232R-3V3-WE Cables
The TTL-232R-5V-WE and TTL-232R-3V3-WE cables are both un-terminated; they are bare and tinned
wires. The difference between the two cables is that the TTL-232R-5V-WE operates at +5V levels (signals
and power supply) and the TTL-232R-3V3-WE operates at +3.3V levels (signals only, VCC=+5V).
TTL-232R-5V-WE, TTL-232R-3V3-WE Connections and Mechanical
Details
The following Figure 6.1 shows the cable signals and the wire colours for these signals on the TTL-232R-
5V-WE and TTL-232R-3V3-WE cables.
TTL-232R-5V-WE and TTL-232R-3V3-WE Cable Signal Descriptions
Reviews
There are no reviews yet.